Repair to foam cored carbon reinforced epoxy flying fifteen

Repair to foam cored carbon reinforced epoxy flying fifteen

This boat was involved in a” racing incident”with 3 other boats, it sustained a large hole above the waterline.I took  the keel off and turned the boat upside down so I could reach the inside more easily to re laminate the hull. The outside skin of glass/epoxy,and gelcoat is wafer thin on these boats so an invisible repair is difficult and time consuming to achieve i long boarded the repair to remove any humps and hollows,and the repair is now completely invisible….DSC_0006DSC_0006DSC_0010DSC_0003